Find Part Number 21054-2A With NSN 5905-00-832-5237 by General Dynamics Global Imaging!

Part Number: 21054-2A
Alternate P/N: 210542A
NIIN: 008325237
CAGE Code: 10112
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 00

Welcome to National Stock Numbers Quotes, your go-to solution for Resistor Variable Nonwire Wound components by General Dynamics Global Imaging. With over 2 billion ready-to-purchase products in our inventory, customers can easily meet rigid time constraints and inflexible budget parameters. National Stock Numbers Quotes maintains a diverse database of items that suit a myriad of industry verticals, including aerospace, defense, and civil sectors, among others. On this page, you can submit a quote request for part number 21054-2A with NSN 5905008325237 to receive a customized solution in as little as 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

At National Stock Numbers Quotes, we make it a priority to meet our customers’ operational requirements, so we keep catalogs fully stocked with in-demand NSN parts like those with the FSC 5905 Resistors by General Dynamics Global Imaging. For additional specification regarding your part needs, you can also find a wide range of items by their respective CAGE Code, such as 10112, and many other designations for your ease-of-search. Kick off the procurement process with a competitive quote for NSN 5905-00-832-5237 today and see why customers continuously rely on National Stock Numbers Quotes time and time again. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock! 

NSN Information for Part Number 21054-2A with NSN 5905-00-832-5237, 5905008325237

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-832-5237

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

5905008325237N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
5905-00-832-5237296

Characteristics Data of NSN 5905-00-832-5237, 5905008325237

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY7
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER2.8750 INCHES MAXIMUM
AAVMPILOT LENGTH0.0550 INCHES NOMINAL
ABPMBODY DIAMETER3.125 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES MAXIMUM
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
ADAQBODY LENGTH5.000 INCHES MAXIMUM
ADAVOVERALL DIAMETER3.364 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER3.0050 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0980 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE7.00 INCH-OUNCES
AEFZSHAFT RUNOUT0.001 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS 4TH SECTION
CQCCELECTRICAL RESISTANCE PER SECTION570.0 OHMS 2ND SECTION
CQCCELECTRICAL RESISTANCE PER SECTION7.0 PERCENT,RATED AMPERES C FLOORING
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.02/0.02 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR ALL SECTIONS
CRJSFIXED TAP QUANTITY PER SECTION1 4TH SECTION
CRJSFIXED TAP QUANTITY PER SECTION2 5TH SECTION
CRJSFIXED TAP QUANTITY PER SECTION3 3RD SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT0.0 TO 20.0 3RD SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT0.0 TO 20.0 5TH SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT0.0 TO 20.0 7TH SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-0.5/0.5 6TH SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 1ST SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 ALL SECTIONS
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
ABHPOVERALL LENGTH5.780 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER2.875 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0600 INCHES MINIMUM
AEGALATERAL RUNOUT0.003 INCHES
AEGBPILOT DIAMETER RUNOUT0.001 INCHES
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 6TH SECTION
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS 3RD SECTION
CQCCELECTRICAL RESISTANCE PER SECTION5.0 PERCENT,RATED AMPERES C DROP SIDING
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0 TO 400.0 ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/10.0 4TH SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0/20.0 2ND SECTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS TABLE
TESTTEST DATA DOCUMENT19200-10545461 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY27 TURRET

Related NSN Components of 21054-2A

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

No China Banner
No China Parts The only independent
distributor with a
NO CHINA SOURCING Pledge
USA Flag Banner
USA Flag
  • All Orders are Fulfilled in the U.S.A.
  • All shipments must comply with U.S.A. export laws.
  • No exceptions.
Fallen Heros Banner
Fallen Heros Fund

“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.