| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.081 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| ADJS | EXTERIOR COLOR | BLUE" |
| AGAV | END ITEM IDENTIFICATION | 3930-01-158-0849" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF AND ABRASION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 57.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND WATER AND AIR SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE J517, 100R2-81343 NATIONAL STD/SPEC" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.081 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| ADJS | EXTERIOR COLOR | BLUE" |
| AGAV | END ITEM IDENTIFICATION | 3930-01-158-0849" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF AND ABRASION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 57.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND WATER AND AIR SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE J517, 100R2-81343 NATIONAL STD/SPEC" |
The only independent
